Lately, I have been painting a lot of 8×10 paintings on canvas panels. They don’t take much time and you can keep the panel on your lap, or wherever you feel comfortable.
Another advantage of doing an 8×10 inch painting is that you can experiment different with different techniques and see the result fairly quickly.
Anyway, here is my latest painting done for a study on rocks. I call it Sticks and Stones.
Beware of the pouring medium mixed with water as it can destroy your painting. I had a painting I had been meaning to varnish for a few months and finally decided to do it 3 days ago. For isolation coat, I figured I would use the pouring medium sold by Liquitex. It levels itself and doesn’t leave brush marks making it perfect for an isolation coat. What could go wrong? Right?
Wrong. I mixed the pouring medium with quite a bit of water to get it to flow easily (which was a mistake). It did flow very easily and had the same consistency as water. However, the medium was taking too long to dry so after waiting 2-3 minutes, I started to brush off the excess medium (which was another mistake). After the painting dried, I noticed that sections of it had gone white. The medium dissolved the acrylic paint and probably took the paint with it while I was trying to get excess medium off the canvas.
Needless to say, I redid parts of the painting that had gone white and varnished it again. This time I was very careful and the painting came out looking better than it did before.
Another thing I noticed while painting on top of pouring medium layer is that my paint stayed wet for longer than usual. Not as long as as oil paints do, but long enough that I could blend very easily. I am going to experiment with this new knowledge and see what it goes.
– Don’t mix too much water into the pouring medium when using it as an isolation coat for varnish.
– Don’t be impatient after you have varnished or put on an isolation coat. Give it as much time as it needs to dry off. The painting probably would have been ok if I had not tried to brush off excess medium after waiting a few minutes.
– Acrylic mediums can liquify acrylic paint even after it has dried completely.
– High gloss finish looks very good on some paintings.
Here is the painting that almost got destroyed by the pouring medium on the wall of the person who asked me to paint it.